LIC 4115/LIC 4195

    Specifications

    Linear scale

    LIC 4005

    Measuring standard

    Coefficient of linear expansion

    Steel scale tape with METALLUR absolute and incremental track

    Depends on the mounting surface

    Accuracy grade

    ±5 µm

    Baseline error

    ±0.750 µm/50 mm (typical)

    Measuring length ML* in mm

    140 240 340 440 540 640 740 840 940 1040 1140 1240 1340 1440

    1540 1640 1740 1840 1940 2040

    Larger measuring lengths up to 28 440 mm with a single-section scale tape and individual scale-carrier sections

    Mass Scale tape

    Parts kit

    Scale-tape carrier

    31 g/m

    80 g + n4) × 27 g

    187 g/m

    Scanning head

    LIC 411 scanning head

    AK LIC 419 F

    AK LIC 419 M

    AK LIC 419 P

    Interface

    EnDat 2.2

    Fanuc Serial Interface

    αi interface

    Mitsubishi high speed interface

    Panasonic
    Serial Interface

    Ordering designation*

    EnDat22

    Fanuc05

    Mit03-4

    Mit02-2

    Pana01

    Measuring step*

    0.01 µm (10 nm)

    0.005 µm (5 nm)

    0.001 µm (1 nm)

    0.01 µm (10 nm)

    0.005 µm (5 nm)2)

    0.001 µm (1 nm)3)

    0.01 µm (10 nm)

    0.005 µm (5 nm)

    0.001 µm (1 nm)

    Calculation time tcal

    Clock frequency

    5 µs

    16 MHz

    Traversing speed1)

    600 m/min

    Interpolation error

    ±20 nm

    Electrical connection*

    Cable, 1 m or 3 m with 8-pin M12 coupling (male) or 15-pin D-sub connector (male)

    Cable length
    (with HEIDENHAIN cable)

    100 m

    50 m

    30 m

    50 m

    Voltage supply

    DC 3.6 V to 14 V

    Power consumption1) (max.)

    At 3.6 V: 800 mW

    At 14 V: 900 mW

    At 3.6 V: 950 mW

    At 14 V: 1050 mW

    Current consumption (typical)

    At 5 V: 75 mA (without load)

    At 5 V: 95 mA (without load)

    Vibration 55 Hz to 2000 Hz

    Shock 6 ms

    500 m/s2 (EN 60 068-2-6)

    1000 m/s2 (EN 60 068-2-27)

    Operating temperature

    –10 °C to 70 °C

    Mass Scanning head

    Connecting cable

    Connector

    18 g (without cable)

    20 g/m

    M12 coupling: 15 g; D-sub connector: 32 g

    * Please select when ordering

    1) See General electrical information in the brochure Interfaces for HEIDENHAIN Encoders

    2) Up to measuring length ML 21 040

    3) Up to measuring length ML 4140

    4) n = 1 at ML 3140 mm to 5040 mm; n = 2 at ML 5140 mm to 7040 mm; etc.*